Registering The Satellite Router - Hughes HX90 Installation Manual

Registering the satellite router

Chapter 4 • Commissioning the satellite router
52
1039456-0001 Revision A
To register the satellite router with the service provider's network, you select and
access a registration server.
To register the satellite router:
Next
1. Click on the Transmit Antenna Pointing screen.
2. On the Registration Server Selection screen, select a registration server from the
drop-down list.
• For U.S. and Canadian consumer installations, select
SAN_and_PIN_Registration.
• For enterprise installations and installations outside of the United States and
Canada, select SiteID_Registration.
If you are unsure which server to select, refer to the Installation Reference Sheet or
installation specification.
Figure 35: Selecting the registration server
If necessary, you can manually enter the registration server's address as follows:
a. Select the Enter Registration Server Address Manually checkbox.
b. Enter the registration server's address in the HTTP:// field.
c. Select the Secure HTTP Mode checkbox to enable a secure connection to the
registration server.