Entering Parameters-Manual Commissioning - Hughes HX90 Installation Manual

Entering parameters—manual commissioning
Chapter 4 • Commissioning the satellite router
58
1039456-0001 Revision A
keys and certain parameters to the router. Manual commissioning process consists
of:
• Entering manual commissioning parameters
• Antenna pointing
For both tasks you use the satellite router's web-based interface.
Note: The satellite router's serial number must be loaded at the NOC by a NOC
representative to complete the manual commissioning process.
Follow these steps to enter the manual commissioning parameters:
1. Open a web browser on the installer laptop.
2. Type
http://192.168.0.1/fs/registration/setup.html
browser address bar and press
The Satellite Setup menu appears.
Enter
.
Figure 44: Satellite Setup menu
in the