Uploading The Sbc.cfg File To The Satellite Router - Hughes HX90 Installation Manual

Uploading the sbc.cfg file to the satellite router

Chapter 4 • Commissioning the satellite router
32
1039456-0001 Revision A
The file contains satellite information for SBC and the auto-commissioning
sbc.cfg
server (ACS) to be used for the commissioning process. Once you have obtained the
file, save it on the installer laptop computer making sure to note the
sbc.cfg
location where the file is saved.
If you do not need to upload an
page 34 to upload the
sbc.cfg
1. Open a browser on the installer laptop.
2. Type
http://192.168.0.1/fs/registration/setup.html
address bar.
Enter
3. Press .
The Satellite Setup menu appears.
4. Click Config File Upload
Note: Do not click Zip Code File Upload
code table in the router.
file, go toEntering the antenna location on
sbc.cfg
file:
Figure 11: Satellite Setup menu
.
–this button is used to update the ZIP
in the