Help Page - Hughes HX90 Installation Manual

Table 9: System Information page parameters — HX90 Info section (Continued)
Parameter
Software Release
LAN1 IP Address
LAN1 Subnet Mask
LAN1 MAC Address
LAN2 IP Address
LAN2 Subnet Mask
LAN2 MAC Address
NAT IP Address
NAT Subnet mask

Help page

Version of the router's software. This is typically the factory-installed
software version. However, if the NOC downloads a newer version of
Gateway software to the router, the newer version number is
displayed.
The satellite router address. The default router address is 192.168.0.1.
A different router address can be configured.
Range of addresses available to the satellite router.
MAC address for the satellite router.
Address available for a second LAN connection.
Subnet mask (range of available addresses) available for a second LAN
connection.
MAC address a second LAN connection.
The Internet routable public IP address assigned to the router. NAT
translates this address to local private addresses in the range
192.168.0.x that can be used by the devices on your local network
(where x = 0-9).
The NAT subnet mask (range of available addresses) assigned to the
router is always 255.255.255.255.
The System Control Center Help page (Figure 65 on page 84) contains information to
help the user get started in using the satellite router, find contact information for
assistance, and other helpful information.
To display the Help page:
• Click
View Help Topics
Explanation
on the System Control Center home page.
Chapter 6 • System control center
1039456-0001 Revision A
83