Programming Instructions; Navigating Through The Programming Mode Menus - Response SL5 Installation & Operating Manual

PROGRAMMING INSTRUCTIONS

With the system in Standby (i.e. with the display
showing 'DISARM READY').
Press
, ? ?
Master User Access Code
Note: To get to Standby Mode simply press
repeatedly until only the POWER LED is illuminated.
The system is now in Program Mode.
NAVIGATING THROUGH THE
PROGRAMMING MODE MENUS
(Read carefully before you start).
The programmable system parameters are
arranged by group in a series of menus within
programming mode.
Each menu (and sub-menu) will contain all
programmable system parameters related to the
particular function.
Note: Some basic system
contained within the system menu because they
relate to a number of different functions.
At each menu level use the
scroll through the available options.
Note: A menu item displayed in full capitals
(e.g. 'USER SETUP')
another menu below that option. An option
displayed in lower case (e.g.
Access Code') indicates that this is a parameter
setting and no menu below, (although there may
be setting options).
Press to:
ENTER
a) select the displayed menu, or
b) change the displayed parameter setting, or
c) save the changed parameter setting and
revert to the previous level.
Press to:
ESC
a) exit to the previous menu level, or
b) revert to the previous level without saving a
changed parameter setting.
Note: After programming all required functions,
press to leave Programming mode and return
ESC
to Standby.
32
? ? ,
ENTER
parameters will be
and buttons to
indicates that there is
'1.0 Master User
USER SETUP MENU
Master User
User 1 Access Code
User 2 Access Code
User 3 Access Code
ESC User 4 Access Code
User 5 Access Code
User 6 Access Code
Duress Access Code
SYSTEM SETUP MENU
Alarm Duration
Entry/Exit Delay period
Entry Delay Beeps
Exit Delay Beeps
Wireless Siren
Wired Siren
Auxiliary Relay
Jamming Detection
Zone Lockout
Time
Date
Dial Mode
Remote Phone Access Control
Rings To Answer Phone
ZONE SETUP MENU
Learn Detector Code
Zone Name
Zone Type
Zone Mode
Part-Arm 1
Part-Arm 2
Chime
LATCH KEY SETUP MENU
Status
User status
Record User ID messages
Replay User ID messages
Phone Numbers
REMOTE MANAGER SETUP MENU
Phone Numbers
System ID Code
Access Code