Related Manuals for Response CWFK1/CA3
Summary of Contents for Response CWFK1/CA3
- Page 1 Wireless Colour Camera CCTV System CWFK1 / CA3 Installation and Operating Instructions These instructions should be retained in a safe place for future reference.
-
Page 2: Table Of Contents
CONTENTS INTRODUCTION Setting the Camera Channel (Optional) 2 KIT CONTENTS Setting the Receiver Channel (Optional) 3 INSTALLATION Night Vision Direct Connection of the Camera and Interference Receiver to the TV TROUBLESHOOTING Connection of the Receiver to a VCR / DVR 6 TECHNICAL SPECIFICATION Wireless Camera Installation VIEWING THE CAMERA... -
Page 3: Introduction
INTRODUCTION Section 1 The Response Wireless Colour Camera CCTV System is a monitoring system designed to help protect your home or office. SAFETY AND INSTALLATION TIPS: Do not attempt to open the units with the power adaptor plug connected to avoid any risk of personal injury. -
Page 4: Kit Contents
CONTENTS Section 2 CWFK1: x Wireless Colour Camera 1 x Wireless Receiver unit 1 x Video output cable for wireless receiver to TV 1 x Wireless Camera power supply adaptor (12VDC/300mA) 1 x Wireless Receiver power supply adaptor (12VDC/300mA) 1 x Camera fixing kit - wall plugs and screws 1 x Window stickers 1 x Installation and operating manual CA3:... -
Page 5: Installation
INSTALLATION Section 3 3.1 Direct Connection of the Receiver to the TV TV / MONITOR WIRELESS RECEIVER DC12V POWER VIDEO AV Input Yellow Connector DVRs Power INPUT 1 INPUT 2 OUTPUT (VIDEO) Supply Adaptor Connect the video cable and power adaptor’s output plug into the receiver. 2. -
Page 6: Connection Of The Receiver To A Vcr / Dvr
3.2 Connection of the Receiver to a VCR / DVR WIRELESS RECEIVER DC12V TV / MONITOR POWER VIDEO DVRs Power Supply Adaptor AV Input Yellow Connector INPUT 1 INPUT 2 OUTPUT (VIDEO) VIDEO INPUT CONNECTIONS ON VCR/DVR OUTPUT Video Cable (Not Supplied) Connect the video cable and power adaptor’s output plug into the receiver. -
Page 7: Wireless Camera Installation
Wireless Camera Installation Mount the camera in a selected location using the fixing screws and plugs supplied. If the camera is installed outdoors on an external wall you will need to drill a cable entry hole of around 15mm for the cable to pass through the wall. Feed the camera’s cable through the cable entry hole into the property, so that all connections are made inside. -
Page 8: Viewing The Camera
The sun shade hood can be removed from the camera body and re-attached for installation flexibility. This is done by sliding along the body of the camera as shown. Weather-proof VIEWING THE CAMERA Section 4 4.1 Viewing the Wireless Camera from the Receiver connected directly to a TV Connect the camera and receiver as described in ‘Direct Connection of the Receiver to the TV’... -
Page 9: Setting The Camera Channel (Optional)
3. Turn ON your TV and VCR or DVR. 4. Playback a tape on the VCR or recorded video on the DVR to confirm your TV is on the correct channel. 5. Tune the input viewing channel of the VCR or DVR until your camera appears on screen. -
Page 10: Setting The Receiver Channel (Optional)
Setting the Receiver Channel (Optional) The wireless receiver is capable of receiving up to 4 separate channels. The front of the wireless receiver has 4 LEDs representing the 4 channels of the receiver. When lit, the LED will indicate which channel is currently being displayed. In the diagram below CH1 is lit up indicating channel 1 will be displayed on the screen. - Page 11 - dense materials such as concrete or metal will impede the wireless signal; move the camera and/or receiver away from dense materials. A metal radiator is an example. - if possible keep the camera and receiver away from or move conflicting devices such as wireless routers, microwaves, cordless phones.
-
Page 12: Troubleshooting
TROUBLE SHOOTING Section 5 PROBLEM SOLUTION can’t see the Camera Ensure the camera and receiver are plugged in. my TV and the TV / VCR / DVR is tuned to the correct input channel as described on page 9. white image appears The camera’s infra-red LEDs shine invisible light at night that reflects of surfaces such as glass causing white... -
Page 13: Technical Specification
TECHNICAL SPECIFICATION Section 6 ITEM WIRELESS CAMERA Image sensor 1/3” CMOS Pixel resolution PAL: 628 x 582 NTSC: 510 x 492 380 TV lines Lens size Viewing angle 60° Night vision range Up to 7m Number of infra-red LEDs Day / night mode Colour during the day / switches to B&W at night Minimum illumination 5 Lux when the IR lamps are turned on... -
Page 14: Accessories In The Range
ACCESSORIES IN THE RANGE Section 7 There are a range of accessories available in the Response CCTV product range to expand your system: CWK1 Wired Colour Camera CCTV Kit 2 Channel Digital Video Image Recorder LCD Screen for Wireless / Wired CCTV Kits... -
Page 15: Disposal And Recycling
DISPOSAL – RECYCLING INSTRUCTIONS Section 8 Directive (2002/96/EC) This product is classified by the Waste Electrical or Electronic Equipment (WEEE) Directive. It should not be disposed of with other household or commercial waste. At the end of its useful life the packaging and product should be disposed of via a suitable recycling centre. -
Page 16: Customer Helpline
1. Proof of purchase. 2. A full description of the fault. 3. All relevant batteries (disconnected). Response is a trademark of Novar ED&S. CUSTOMER HELPLINE Most issues can be solved over the phone in a few minutes. Please contact our Helpline Team on the number below for any...