Voice Dialler - Response SL5 Installation & Operating Manual

Notes:
To enter code B, press
To enter code C, press
To enter code D, press
To enter code E, press
To enter code F, press
Press to save new setting and exit, or
ENTER
Press to exit without saving.
ESC

VOICE DIALLER

The parameters in this menu allow the setting of
the systems Voice Dialler. It allows up to 4 phone
numbers to be entered and called in sequence.
The alarm voice messages are also recorded here.
Note: For the Voice Dialler to operate correctly
the 'Dialler Mode' (see system setup) must be
correctly set and programmed.
Ensure all Alarm Messages are recorded (see
Record Alarm Messages, right).
Refer to Voice Dialler Setup diagram on page 44.
Scroll through the programming menu until
DIALER SETUP' is displayed and press
Note: After completing the
to return to the top level programming menu.
ESC
PHONE NUMBERS
Scroll through the menu until
is displayed and press
Scroll through the menu until the required
No._' (and the current setting) is displayed.
To change the setting press
Enter the new phone number (32 digits max.)
Notes:
Press to insert a 3.5 seconds pause in
the dialling sequence.
Press to move the cursor left.
1
,
2
,
3
,
4
,
5
,
'5.
.
ENTER
Voice Dialler Setup press
'5-1 PHONE NUMBERS'
.
ENTER
'Phone
.
ENTER
Press
Press
the cursor.
Press
number.
Press
Press
After programming all required phone numbers press
to return to the top level Voice Dialler menu.
ESC
RECORD
Scroll through the menu until
MESSAGES'
Scroll through the available menu options until the
required message to be recorded is displayed.
a) Main message (12 seconds max.).
b) Intruder Alarm message (5 seconds max.).
c) Fire Alarm message (5 seconds max.).
d) Panic/PA Alarm message (5 seconds max.).
e) Duress alarm message (5 seconds max.).
To change the setting press
Press
VOICE
After recording, press
recorder and cancel any remaining recording
time. The new message will then be replayed.
Press
Press
ESC
Setup menu.
REPLAY ALARM MESSAGES
Scroll through the menu until
MESSAGES'
Scroll through the menu options until the required
message is displayed and press
message.
Press
ESC
menu.
to move the cursor right.
to delete the number under
(and hold) to erase the entire
to save and exit, or
ENTER
to exit without saving.
ESC
ALARM MESSAGES
'5.2 RECORD
is displayed and press
ENTER
1
to start the voice recorder.
ESC
3
to exit without saving
to return to the top level Voice Dialler
'5.2 RECORD
is displayed and press
to return to the top level Voice Dialler
ALARM
.
ENTER
.
to stop the
ALARM
.
ENTER
to replay the
ENTER
43