Planning And Extending Your Alarm System; Typical Installation - Response SL5 Installation & Operating Manual

PLANNING
Before attempting to install your Alarm System it is
important to study your security requirements and
plan your installation accordingly.
PIR Movement Detectors are used to protect the main
areas of the property, (e.g. lounge, study, hallway and
landing). Magnetic Door/Window Detectors are typically
used to protect the main access points to the property,
(e.g. front door, back door, patio doors etc). However,
they can also be used to protect other vulnerable
doors/ windows or access doors to important rooms.
TYPICAL INSTALLATION
The following example below shows a typical property
incorporating the suggested positions for the External
Siren, PIR and Magnetic Door / Window Detectors.
Use this as a guide for your installation in conjunction
with the detailed positioning requirements for each
device provided in the appropriate installation sections
in this manual for planning your intruder alarm system.
C
C
B
LOUNGE
C
8
AND EXTENDING YOUR ALARM SYSTEM
F
A
D
D
Back Door
KITCHEN
HALL
A D
GROUND FLOOR
Typical Installation using only the detectors
supplied:
1. Place the 1st
on zone 1) on the front door.
2. Place the 2nd
on zone 2) on the back or patio doors.
3. Place the 1st PIR Detector (set on
the 2nd PIR Detector (set on zone 4) in two of
the following locations:
i) downstairs in the main living room containing
most valuables, or
ii) on the landing covering the access routes
between bedrooms and the stairs, or
iii) in the hall covering the Control Panel and
routes between downstairs rooms.
E
C
D
SHED
C
DINING
ROOM
GARAGE
Door / Window Detector (configured
Door / Window Detector (configured
A
B
D
C
D
D
D
E
F
zone 3) and
POWER ALARM ALARM MEM/ LINE
STATUS MESSAGE STATUS
1 2 3
4 5 6
? !
7 8 9
ESC
0
ENTER
Control Panel
Remote Control
PIR Movement
Detector
Magnetic
Door/Window
Detector
External
Solar Siren
Dummy Siren