Friedland Spectra Plus Lighting Setup - Response SL5 Installation & Operating Manual

FRIEDLAND SPECTRA
LIGHTING SETUP
7.1 Lamp On Time
xx minutes
Enter (1-20 mins)
Scroll through the menu until
LIGHTING SETUP' is
press .
ENTER
After configuring the Spectra Plus lighting press
to return to the top level programming menu.
SET LIGHT- ON PERIOD
This controls the time period for which any linked
Spectra lighting is switched on for following an
alarm condition.
Scroll through the system menu until
Time' (and the current setting) is displayed.
To change the setting press
Enter the required light-on period
(1 to 20 minutes).
Press to save the new setting, or
ENTER
Press to exit without saving.
ESC
SET LIGHTING OPERATING MODE
This controls whether the Spectra Lighting is active
and if it operates on a 24 hours basis or is time
controlled. If time controlled it means that the user
can set the time in the morning after which an alarm
will no longer cause the lights to activate and the
time in the evening after which an alarm will allow
the lights to be activated again. This prevents the
lights from being triggered during the day.
Scroll through the system menu until
Mode' (and the current setting) is displayed.
PLUS
PROGRAM MODE
Code:
7.2 Lamp On Time
xxxxxxxxxxxxxx
press ENTER
Time-Controlled
enter time
press ENTER select menu item
'7. SPECTRA
displayed on the LCD and
'7.1 Lamp On
.
ENTER
'7.2 Spectra
enter Master User Access Code and press ENTER
7. SPECTRA
LIGHTING SETUP
press ENTER
7.3 Stop Time
press ENTER
off stop: HH:MM
24-hour
press ENTER
To change the setting press
Options: OFF / 24-Hour / Time-Controlled
ESC
STOP TIME
This controls the time of day after which triggering
an alarm will no longer be able to activate the
Spectra Lighting.
Scroll through the system menu until
(and the
START TIME
This controls the time of day after which triggering
an alarm will be able to activate the Spectra Lighting.
Scroll through the system menu until
(and the
7.4 Start Time
HH:MM
press ENTER
stop: HH:MM
enter time enter time
press ENTER press ENTER
Press to save the new setting, or
ENTER
Press to exit without saving.
ESC
current setting) is displayed and press
Enter the new time in the format 'hh:mm'
using the 24 hour clock format.
Press to save the new setting, or
ENTER
Press to exit without saving.
ESC
current setting) is displayed and press
Enter the new time in the format 'hh:mm'
using the 24 hour clock format.
Press to save the new setting, or
ENTER
Press to exit without saving.
ESC
HH:MM
press ENTER
.
ENTER
'7.3 Stop Time'
ENTER
'7.4 Start Time'
ENTER
.
.
47