Accessories
6.3. Mouse
Any USB mouse or any mouse with RS-232 port can be connected to the MTC 6.
6.4. External CD/DVD-ROM drive
An external CD/DVD-ROM drive is available for the MTC 6. This is connected via the
USB interface.
When connecting an external USB CD/DVD-ROM drive which has
its own external power supply the MTC 6 must be disconnected
from the power supply. The CD/DVD-ROM must be powered up
simultaneously or after the MTC 6 as otherwise this can cause
NOTICE:
start-up problems, malfunctions, or even the destruction of the
Property
device.
damage
Please note: Not every device classified as a USB CD/DVD-ROM is
a proper USB CD/DVD-ROM drive. Only use devices approved by
DLoG to ensure the device is fully compatible.
The CD/DVD-ROM drive is bootable once it has been properly installed. To boot from a
CD/DVD-ROM, insert a bootable CD/DVD and start the system.
In the BIOS USB CDROM must be entered as a boot device.
6.5. USB stick
You can connect a USB stick to the MTC 6 with a USB-A connector.
54
User's Manual V2.00
MTC 6 Series