Table of Contents
Advertisement
Initial operation
5.7. Service USB interface
A service USB interface is arranged under the antenna cap of the MTC 6.
Please observe the following information:
• Chapter 7.8 Antenna cap and service USB interface
NOTICE:
Property
damage
50
The service USB interface may only be used for maintenance
purposes, e.g. to load software updates.
The antenna cap/service USB interface may only remain open for
the duration of the service work. It may only be opened and
closed by qualified technical personnel. No objects or fluids may
be introduced into the MTC 6 while the antenna cap and the USB
interface are open.
Only when the antenna cap/service USB interface is properly
closed again may operation be resumed; protection class is then
ensured again.
If the MTC 6 is operated with the antenna cap/service USB
interface open for a longer period of time than required for service
tasks, any warranty claim against DLoG GmbH for the unit will be
void.
Figure 5.11: Service USB under the antenna cap
User's Manual V2.00
MTC 6 Series
Advertisement
Table of Contents
