2.6. Connect / disconnect external devices
Disconnect the industrial PC from the power supply before
connecting / removing peripheral devices (this does not apply
to USB devices)
Otherwise considerable damage could be caused to both the
industrial PC and the peripheral devices.
• Make sure that peripherals with their own power supply are either
NOTICE:
Property
• If you don't do this, you must ensure that a backflow from the
damage
Only use authorized accessories
• Only use the cables, power packs and other accessories that
• Ask your Advantech-DLoG sales representative about authorized
MTC 6 Series
switched on at the same time as the industrial PC or after the
industrial PC is switched on.
external device to the industrial PC cannot take place.
have been tested and approved for the respective industrial PC
by DLoG GmbH.
accessories.
User's Manual V2.00
Basic safety guidelines
9