Basic safety guidelines
2. Basic safety guidelines
• Please read and follow these safety instructions.
• Do not throw them away.
2.1. Always install, operate, and maintain the unit properly
The MTC 6 was designed and built according to modern technology and accepted safety
regulations. However, the operation of the MTC 6 can endanger personnel or third
parties and cause damage to the device and other material assets when for example the
device is
•
installed incorrectly or improperly.
•
operated by untrained or uninstructed personnel.
•
improperly operated and maintained.
•
not used as intended.
The operator commitments in regards to safety (accident prevention regulations, work
protection) are to be followed.
2.2. Safety
In order to prevent injury and damage, please read and observe the following safety
guidelines prior to assembly and commissioning. The manufacturer assumes no liability
for any and all damages that can be attributed to non-compliance with these guidelines.
2.3. Intended usage
MTC 6 industrial PCs are multifunctional terminals for stationary and mobile use in
commercial environments (e.g. logistics, warehousing, fleet management, manufacturing,
automotive).
Any other or additional use is not as intended.
The user/operator of the industrial PC is solely responsible for any resulting damage.
This also applies to unauthorized modifications to the unit.
4
User's Manual V2.00
MTC 6 Series