9. Operating system
9.1. Pre-installed on Flash
When a MTC 6 with a pre-installed operating system is started, this operating system is
loaded following the BIOS boot messages. System-specific device drivers – such as
those for graphic, sound, network and touch screens – are also pre-installed.
In MTC 6 units with a pre-installed operating system, the system is located on the
C partition.
9.2. Installing on Flash
When a MTC 6 is started up for the first time without a pre-installed operating system, the
user needs to carry out a number of steps that will vary depending on the system to be
installed. Refer to the relevant operating system manual for specific instructions.
The installation and configuration of the operating system should
NOTICE:
only be carried out by professionals familiar with the system
Property
environment.
damage
MTC 6 Series
User's Manual V2.00
Operating system
69