Mounting; Pay Careful Attention To Mounting Instructions; Cooling Through The Supply Of Fresh Air - Advantech DLoG MTC 6 Series User Manual

Mounting

7. Mounting

7.1. Pay careful attention to mounting instructions

Please follow the mounting instructions included with assembly kit when installing your
MTC 6.
WARNING
The unit could fall during transit or installation/mounting and cause
injury. Always ensure that there are two persons available when
installing or removing the device.
Please make sure that you retain the instructions. Pay careful attention to the Basic
safety guidelines included in the beginning of this manual.

7.2. Cooling through the supply of fresh air

The MTC 6 employs a passive cooling concept whereby the waste heat generated
inside the device is emitted from the surface of the housing. For this system to function
properly, sufficient fresh air circulation is required.
Never install the system in a closed environment where the cooling air is unable to
dissipate accumulated heat to the outside.
If the MTC 6 does not have access to fresh cooling air, it may result
NOTICE:
in overheating and severe damage to the unit. The maximum
Property
permissible ambient temperature for the entire system needs to be
damage
taken into account for the concrete application area.
56 User's Manual V2.00 MTC 6 Series