Cable Cover (Splash Guard); Strain Relief - Advantech DLoG MTC 6 Series User Manual

7.5. Cable cover (splash guard)

For safety reasons, the supplied cable cover for the external ports
NOTICE:
must be installed prior to using the MTC 6.
Property
damage
Protection class
In order to comply with the certified protection class, please use the optionally available
assembly kit from Advantech-DLoG.
Please observe the installation instructions included with this assembly kit.

7.6. Strain relief

After the MTC 6 and bracket are fastened:
• Prepare the strain relief.
• Install the cables loosely on the strain relief rail.
• As far as possible, route cables leading to or away from the unit next to one another
without crossing.
Completing:
• Fasten the cables to the strain relief rail.
• Be sure that the cables are fastened precisely at the positions at which the cable
openings in the cable cover are located.
MTC 6 Series User's Manual V2.00
Mounting
61