Advantech DLoG MTC 6 Series User Manual page 69

• The other end of the yellow-green supply voltage cable should be connected to the
vehicle's chassis.
• Make sure that the MTC 6's connecting cable is attached as close to the battery as
possible. Connecting the MTC 6 to large electrical loads, such as converters for the
forklift motor may result in random restarts, malfunctions and/or irreparable damage
to the device.
• If you want to connect devices fed by other power sources to the MTC 6, such as
printers and so on, be sure to power up the peripheral devices at the same time or
after the MTC 6. Otherwise, you may encounter start-up problems, malfunctions or
even irreparable damage to the device.
MTC 6 Series User's Manual V2.00
Mounting
59