Installation Procedures; Connecting The Power Cable; Connecting The Keyboard And Mouse - Advantech PPC-415 6 Series User Manual

2.2

Installation Procedures

2.2.1

Connecting the Power Cable

The PPC-415/417/419 panel PC features a DC power socket (9 ~ 32 V). When con-
necting the power cable, hold the cable at the plug end.
Follow the procedures outlined below to ensure correct setup.
1. Before connecting the power cable, check that the system's power mode setting
is configured according to your requirements. To use AT power, flip the AT/ATX
switch (shown below) to AT mode (the default setting is ATX mode).
2. Connect the 2-pin male connector of the power cable (provided in the accessory
box) to the power socket.
Power Button
The power button is located on the bottom right of the panel PC.
Note!
The power cable and adapter are optional.
2.2.2

Connecting the Keyboard and Mouse

Connect the keyboard and mouse to the I/O interfaces located at the rear of the
panel PC.
PPC-415/417/419 EHL User Manual
Figure 2.4 Power Cable Connector
10