2.8. Clean / maintain industrial PC
Servicing / cleaning the device: Disconnect the industrial PC
from the power supply
• Disconnect the industrial PC from the power supply before
• Never clean the industrial PC with compressed air, a pressure
• If necessary, clean the housing of the industrial PC with a damp
• Clean the touch-screen with a non-abrasive cloth dampened with
2.9. Modifications and repairs only by Advantech-DLoG
Modifications to the industrial PC are not allowed.
Opening the industrial PC is not allowed.
All warranties by DLoG GmbH relating to the industrial PC are
voided by modifications / by opening the unit.
Do not carry out any repairs on the industrial PC yourself.
• Always contact the responsible technical service officer at
• Refer to the nameplate on the back of the unit for important
MTC 6 Series
cleaning or servicing it.
washer or a vacuum cleaner.
cloth.
water.
Advantech-DLoG and send in your unit for repair if necessary.
technical service information.
User's Manual V2.00
Basic safety guidelines
11