Operating States - Advantech DLoG MTC 6 Series User Manual

Operation

8.3. Operating states

The following operating states are possible for the MTC 6:
Status of internal LEDs
Power (green)
OFF
OFF
FLASHING
OFF
ON
ON
ON
68
Temp (red)
MTC 6 status
Initial state, idle time - waiting for a new ignition
OFF
signal after switch-off; no power supply
FLASHING Temperature sensor malfunctioning
OFF MTC 6 is in stand by mode (S3).
The computer will not start until the temperature
ON
inside the unit is between -30 °C and +62 °C
again.
Computer is starting up; normal operational
OFF
state; shutdown delay time is running
Temp. < -30 °C or Temp. > 70 °C
ON
Temperature sensor malfunctioning;
FLASHING
automatic switch-off software configuration
User's Manual V2.00 MTC 6 Series