Advantech MIO-3260 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Desktop
  5. MIO-3260
  6. User manual

Advantech MIO-3260 User Manual

Intel atom e3825 & celeron n2930 pico-itx sbc, ddr3l, 18/24-bit lvds, vga, dp/hdmi, 1 gbe, full-size mini pcie, 4 usb, 2 com, smbus, i2c, msata & mioe
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
MIO-3260
Intel® Atom™ E3825 & Celeron®
N2930 Pico-ITX SBC, DDR3L, 18/
24-bit LVDS, VGA, DP/HDMI, 1
GbE, Full-size Mini PCIe, 4 USB,
2 COM, SMBus, I2C, mSATA &
MIOe

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MIO-3260 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Advantech MIO-3260

Summary of Contents for Advantech MIO-3260

  • Page 1 User Manual MIO-3260 Intel® Atom™ E3825 & Celeron® N2930 Pico-ITX SBC, DDR3L, 18/ 24-bit LVDS, VGA, DP/HDMI, 1 GbE, Full-size Mini PCIe, 4 USB, 2 COM, SMBus, I2C, mSATA & MIOe...
  • Page 2 The documentation and the software included with this product are copyrighted 2017 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.
  • Page 3 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
  • Page 4 Discard used batteries according to the manufacturer's instructions. Technical Support and Assistance Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –...
  • Page 5 Packing List Before installation, please ensure the following items have been shipped:  1 MIO-3260 SBC 1 Startup manual  Cables:  Part Number Description 1700006291 SATA cable 7P 30 cm w/ right angle 1700023340-01* Power Cable 2*2P-4.2/2*4P-2.0 10cm 1700023339-01* Inverter and SATA power Cable 2*3P-2.0/1*5P-1.25 15cm...
  • Page 6 The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
  • Page 7 PC is on.  ESD (electrostatic discharge) can cause either catastrophic or latent damage in sensitive electronic components. Take appropriate measures to ensure that any accumulated body charge is removed before accessing electronic devices. A static-safe workbench is ideal. MIO-3260 User Manual...
  • Page 8 MIO-3260 User Manual viii...

  • Page 9: Table Of Contents

    Figure 2.4 MIO-3260 Mechanical Drawing (Top View)....11 Figure 2.5 MIO-3260L Mechanical Drawing (Bottom View)..12 Figure 2.6 MIO-3260C Mechanical Drawing (Bottom View) ..12 Figure 2.7 MIO-3260 Mechanical Drawing (Side View with Heat- sink) ................12 Figure 2.8 MIO-3260 Mechanical Drawing (Side View with Heat- spreader) ..............
  • Page 10 Appendix C System Assignments......81 System I/O Ports..................82 Table C.1: System I/O Ports ............82 1st MB Memory Map................82 Table C.2: 1st MB Memory Map ..........82 Interrupt Assignments ................83 Table C.3: Interrupt assignments..........83 MIO-3260 User Manual...

  • Page 11: Chapter 1 General Introduction

    Chapter General Introduction This chapter gives background information on the MIO-3260. Sections include:  Introduction  Product Features  Specifications...

  • Page 12: Introduction

    Power LED, GPIO, 2 x RS-232/422/485, and 12 VDC input interfaces via two 64-pin internal connectors (MIO-3260L SKU) or cables (MIO-3260C SKU) and Advantech’s innovative MIOe extension slot. MIO-3260 is a cost-effective solution with high inte- gration flexibility. Customers can efficiently make a carrier board or I/O module to expand specific I/O or extend I/O functions to fulfill various vertical market demands.

  • Page 13: Functional Specifications

    Support by 64pin or box wafer connector Supports wake on LAN   Controller: SMSC SCH 3114 Serial ports  2 x RS-232/422/485 serial ports with ESD protection: air gap ± 15 kV, contact ± 8 kV MIO-3260 User Manual...

  • Page 14: Mechanical Specifications

    MIO-3260C-S8A1E: 8.71 W 1.2.4.3 RTC battery  Typical Voltage: 3.0 V  Normal discharge capacity: 210 mAh 1.2.5 Environmental Specifications 1.2.5.1 Operating humidity 40 °C @ 95% RH Non-Condensing 1.2.5.2 Operating temperature 0 ~ 60 °C (32~140 °F) MIO-3260 User Manual...

  • Page 15: Function Block Diagram

    Reset USB 2.0 Power On MIOe 24-bit LVDS Transmitter SMBus 1 SATA II SATAII 300MB/s 2 PCIe x 1 USB 3.0/2.0 BIOS HD Audio Line Out 2 x RS232/422/485 Super I/O GPIO * HDMI supported by request MIO-3260 User Manual...
  • Page 16 MIO-3260 User Manual...

  • Page 17: Chapter 2 H/W Installation

    Chapter H/W Installation This chapter explains the setup procedures of the MIO-3260 hard- ware, including instructions on setting jumpers and connecting peripherals, as well as switches, indicators and mechanical draw- ings. Be sure to read all safety precautions before you begin the...

  • Page 18: Jumpers

    Mini PCIE / mSATA Select 2.1.3 Jumper Settings Table 2.2: J1: LCD Power/Auto Power on Part Number 1653003260 Footprint HD_3x2P_79 Description PIN HEADER 3*2P 180D(M) 2.0mm SMD SOUARE PIN Setting Function (1-2) (3-4) (default) +3.3V (5-6) (default) Auto Power On MIO-3260 User Manual...

  • Page 19: Connectors

    **Supported by request 2.2.2 Connector Settings 2.2.2.1 Battery Connector (BH1) MIO-3260 supports Lithium 3 V/210 mAH CR2032 battery with wire via battery con- nector (BH1). Note! How to clear CMOS: (Follow these steps) 1. Turn off system power. 2. Unplug CR2032 battery cable on BH1.

  • Page 20: Mechanical

    Jumper and Connector Locations CN31 18/24-bit LVDS DDR3L SO-DIMM Socket Figure 2.1 MIO-3260 Connector Location (Top Side) CN5, 64Pin Connector B HDD LED, Power LED, Power bu on, SMBus, I2C, 2xUSB2.0, 8-bit GPIO, HD Audio Line in/out/mic in, 2xRS-232/422/485 CN16...

  • Page 21: Board Dimensions

    Power on, Reset CN14 SATA Inverter & 12V DC input 2 USB2.0 CN11 CN10 SATA power Figure 2.3 MIO-3260C Connector Location (Bottom Side) 2.3.2 Board Dimensions 2.3.2.1 CPU Board Drawing unit: mm Figure 2.4 MIO-3260 Mechanical Drawing (Top View) MIO-3260 User Manual...
  • Page 22 Figure 2.5 MIO-3260L Mechanical Drawing (Bottom View) unit: mm Figure 2.6 MIO-3260C Mechanical Drawing (Bottom View) unit: mm Figure 2.7 MIO-3260 Mechanical Drawing (Side View with Heatsink) MIO-3260 User Manual...

  • Page 23: Quick Installation Guide

    Figure 2.8 MIO-3260 Mechanical Drawing (Side View with Heatspreader) 2.3.3 Quick Installation Guide A heatsink is in the white box, please take it out and remove the protective paper from the thermal pads. Remove the protective paper There are also four screws inside the white box, please install the DRAM in the...

  • Page 24: Optional Thermal Solution - Heat Spreader

    2.3.4 Optional Thermal Solution - Heat Spreader MIO-3260 has an optional heat spreader to make whole system more compact. Using a heat spreader to conduct heat to your chassis can help a lot when the sys- tem is extra compact or has limited space for heat convection. Here are some guide-...

  • Page 25: Chapter 3 Bios Settings

    Chapter BIOS Settings...

  • Page 26: Bios Setup

    AMIBIOS has been integrated into a megaload of motherboards for decades. With the AMIBIOS setup program, users can modify BIOS settings and control various system features. This chapter describes the basic navigation of the MIO-3260 BIOS setup screens. AMI's BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.

  • Page 27: Entering Setup

    BIOS supports your CPU. If there is no number assigned to the patch code, please contact an Advantech application engineer to obtain an up-to-date patch code file. This will ensure that your CPU's system status is valid.

  • Page 28: Advanced Bios Features Setup

    3.2.2 Advanced BIOS Features Setup Select the Advanced tab from the MIO-3260 setup screen to enter the Advanced BIOS Setup screen. Users can select any item in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. Users can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
  • Page 29 OS.  ACPI Sleep State Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed.  Lock Legacy Resources Enables or Disables Lock on Legacy Resources MIO-3260 User Manual...
  • Page 30 3.2.2.2 Super I/O configuration  Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA) Serial Port 2 Configuration  Set Parameters of Serial Port 2 (COMB) MIO-3260 User Manual...
  • Page 31 3.2.2.3 H/W monitor  PC Health Status This page displays all the information about system temperature/voltage. Watch Dog Timer  This item allows users to enable or disable the Watch Dog Timer function. MIO-3260 User Manual...
  • Page 32 Wake system with Fixed Time Enable or disable system wake on alarm event. Selecting FixedTime, the sys- tem will wake on the hr:min:sec specified. Selecting DynamicTime, the system will wake on the current time + Increase minute(s). MIO-3260 User Manual...
  • Page 33 Serial port console redirection  Console Redirection This item allows users to enable or disable console redirection for Microsoft Windows Emergency Management Services (EMS).  Console Redirection This item allows users to configure console redirection detail settings. MIO-3260 User Manual...
  • Page 34 OS (Windows Server 2003 SP1, Windows XP SP2, SuSE Linux 9.2, RedHat Enterprise 3 Update 3.) ® Intel Virtualization Technology  When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.  Power Technology Enables power management features. MIO-3260 User Manual...
  • Page 35 3.2.2.7 PPM configuration  CPU C state Report Enable/Disable CPU C state report to OS. Max CPU C-state  This option controls Max C states that the processor will support.  S0ix Enable/Disable CPU S0ix state. MIO-3260 User Manual...
  • Page 36 SATA Speed Support SATA Speed Supports Gen1 or Gen2. SATA ODD Port  SATA ODD is Port0 or Port1.  SATA Mode Select IDE / AHCI.  Serial-ATA Port 0 Enable / Disable Serial ATA Port 0. MIO-3260 User Manual...
  • Page 37 3.2.2.9 Miscellaneous configuration  OS Selection OS Selection to choose Windows 8.x / Windows 7. MIO-3260 User Manual...
  • Page 38 Storage Controls the execution of UEFI and Legacy Storage OpROM.  Video Controls the execution of UEFI and Legacy Video OpROM.  Other PCI devices Determines OpROM execution policy for devices other than Network, Storage, or Video. MIO-3260 User Manual...
  • Page 39 Maximum time the device will take before it properly reports itself to the host controller. “Auto” uses default value: for a Root port it is 100 ms, for a hub port the delay is taken from hub descriptor. MIO-3260 User Manual...
  • Page 40 Send EOP Message before entering the OS.  TXE Unconfiguration Perform Revert TXE settings to factory defaults.  Intel(R) AT Enable/Disable BIOS AT code from running.  Intel(R) AT Platform PBA Enable/Disable BIOS AT code from running. MIO-3260 User Manual...

  • Page 41: Chipset Configuration

    3.2.3 Chipset configuration  North Bridge Details for North Bridge items. LVDS Config Select  Details on display items. MIO-3260 User Manual...
  • Page 42 3.2.3.1 North bridge  Intel IGD Configuration Config Intel IGD settings. Graphics Power Management Control  Graphics Power Management Control options.  LCD Control LCD Control. Max TOLUD  Maximum value of TOLUD. MIO-3260 User Manual...
  • Page 43 Select DVMT 5.0 total graphic memory size used by the internal graphics device.  Aperture Size Select the aperture size.  GTT Size Select the GTT size. IGD Thermal  Enable/Disable IGD thermal.  Spread Spectrum clock Enable/Disable spread spectrum clock. MIO-3260 User Manual...
  • Page 44 3.2.3.3 Graphics power management control  RC6 (Render Standby) Check to enable render standby support. MIO-3260 User Manual...
  • Page 45 Select the video device which will be activated during POST. This has no effect if external graphics are present. Secondary boot display selection will appear based on your selection. VGA modes will be supported only on the primary dis- play.  LVDS Panel Type MIO-3260 User Manual...
  • Page 46 Enable or Disable boot option for LAN1 controller.  PCIE Wake Enable or Disable PCIE to wake the system from S5. Restore AC Power Loss  Select AC power state when the power is re-applied after a power failure.  Serial IRQ Mode MIO-3260 User Manual...
  • Page 47 Enabled = Azalia will be unconditionally Enabled. Auto = Azalia will be enabled if present, disabled otherwise.  Azalia HDMI Codec Enable/Disable internal HDMI codec for Azalia.  HDMI Port B Enable/Disable HDMI Port B.  HDMI Port C Enable/Disable HDMI Port C. MIO-3260 User Manual...
  • Page 48 Controls the USB EHCI (USB 2.0) functions. One EHCI controller must always be enabled.  USB Per Port Control Control each of the USB ports (0~3). Enable: Enable USB per port; Disable: Use USB port X settings. MIO-3260 User Manual...
  • Page 49 3.2.3.8 PCI Express configuration  PCI Express Port 0 Enable or Disable the PCI Express Port 0 in the chipset. Speed  Configures PCIe port speed MIO-3260 User Manual...

  • Page 50: Security

    3.2.4 Security Select Security Setup from the MIO-3260 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection, are described in this section. To access the sub menu for the following items, select the item and press <Enter>.

  • Page 51: Boot

     Fast Boot Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options.  Boot Option #1 Sets the system boot order. MIO-3260 User Manual...

  • Page 52: Save & Exit

    This item allows you to save the changes done so far as user defaults.  Restore User Defaults This item allows you to restore the user defaults to all the options.  Boot Override Boot device select can override your boot priority. MIO-3260 User Manual...

  • Page 53: Chapter 4 S/W Introduction & Installation

    Chapter S/W Introduction & Installation...

  • Page 54: S/W Introduction

    S/W Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft® Windows® embedded technology.” We enable Windows embedded software products on Advantech platforms to more effec- tively support the embedded computing community. Our goal is to make Windows embedded software solutions easily and widely available to the embedded comput- ing community.

  • Page 55: Susi Installation

    However, due to the inaccuracy among many commercially available hardware mon- itoring chips, Advantech has developed a unique scheme for hardware monitoring - achieved by using a dedicated micro-processor with algorithms specifically designed for providing accurate, real-time and reliable data content;...
  • Page 56 If a previous version is located, please see the [Maintenance Setup] section. If no previous version is located, an alternative window appears. Click Next. MIO-3260 User Manual...

  • Page 57: Susi Sample Programs

    Driver version and Library version show the major SUSI version (4.0) and the revi- sion number (12921). If there is any problem, it is recommended that you send a screenshot of this page or key in the information displayed here to your local FAE. MIO-3260 User Manual...
  • Page 58 GPIO MIO-3260 User Manual...
  • Page 59 1, setting Level will not work for it. Hardware Monitor Hardware monitor will read out all accessible hardware sensors for voltage, tempera- ture, fan speed and board current, and record the minimum and maximum values. MIO-3260 User Manual...
  • Page 60 MIO-3260 User Manual...
  • Page 61 Slave address and Command. – Insert the length of data you'd like to read in text box Read Length, and then click the Read button for read/receive operation. – The read result will be shown in the Result text box. MIO-3260 User Manual...
  • Page 62 Text box Input Data allows inputs of characters [0-9], [a-f], [A-F] and space only. When you are inserting multiple bytes, add a space to let the program know that you are going to insert the next byte data. MIO-3260 User Manual...
  • Page 63 Slave Address. – Insert the length of data you'd like to read in text box Read Length, and then click Read button for read/receive operation. – The read result will be shown in the Result text box. MIO-3260 User Manual...
  • Page 64 Text box Input Data allows inputs of characters [0-9], [a-f], [A-F] and space only. When you are inserting multiple bytes, add a space to let the program know that you are going to insert the next byte data. MIO-3260 User Manual...
  • Page 65 If the backlight control method is not available, the radio button will be un-clickable. – Adjust the slider to adjust the brightness value. – Click the Get button to get the current brightness value. MIO-3260 User Manual...
  • Page 66 Event type is None, you don't need to insert the event time. – Set the event time within range of max/min event time; for the detail of value setting, please refer to section Information of Time Setting. MIO-3260 User Manual...
  • Page 67 – Trigger Timer: When watchdog timer is started and the delay time ends, click Trigger button to reset/restart the timer. – Stop Timer: When watchdog timer has started, clicking the Stop button will completely stop the timer. MIO-3260 User Manual...
  • Page 68 MIO-3260 User Manual...

  • Page 69: Pin Assignments

    Appendix PIN Assignments...

  • Page 70: Jumper Setting

    (1-2) +5 V (3-4) (default) +3.3 V (5-6) (default) Auto Power On Table A.3: J2: Mini PCIE / mSATA Select Part Number 1653002101-03 Footprint HD_2x1P_79_H236_D Description PIN HEADER 1X2P 2.00mm 180D(M) DIP 1140-000-02SN Setting Function (Open) mSATA MIO-3260 User Manual...
  • Page 71 Mini PCIE 64Pin Connector A Part Number 1653005294-01 Footprint HD_32x2P_79_21N22050-64S22B Description PIN HEADER 2x32P 2.0mm 180D(M) DIP 21N22050-64S2 Pin Name +V12_DC_IN +V12_DC_IN + +V12_DC_IN +V12_DC_IN +V5_INVERTER LVDS0_ENABKL LVDS0_VBR +V12_INVERTER VGA_DDAT VGA_DCLK VGA_R VGA_G VGA_B GND_VGA +V5_VGA VGA_HS VGA_VS MIO-3260 User Manual...
  • Page 72 +V5_USB01 +V5_USB01 USB0_z_P- USB1_z_P- USB0_z_P+ USB1_z_P+ GND_IO LINK100#_LED LINK1000#_LED ACT_LED+ ACT#_LED LAN0_M0+ LAN0_M0- LAN1_M1+ LAN1_M1- LAN1_M2+ LAN1_M2- LAN1_M3+ LAN3_M3- GNDT1 GNDT1 MIO-3260 User Manual...
  • Page 73 64Pin Connector B Part Number 1653006017-01 Footprint HD_32x2P_79_2HOLD_21N20250 Description PIN HEADER 2x32P 2.0mm 180D(M) SMD 21N20250-64M2 Pin Name PSIN# Power LED+ Power LED- Reset HD LED+ HD LED- +V5_SMB SMB_DAT SMB_CLK I2C_DAT I2C_CLK +V5SB GPIO4 GPIO0 GPIO5 GPIO1 MIO-3260 User Manual...
  • Page 74 GPIO6 GPIO2 GPIO7 GPIO3 +V5_USB23 +V5_USB23 USB3_z_P- USB2_z_P- USB3_z_P+ USB2_z_P+ GND_IO LOUTR LINR GND_AUD GND_AUD LOUTL LINL GND_AUD GND_AUD MIC1R MIC1L COM0_DCD# COM0_DSR# COM0_RXD COM0_RTS# COM0_TXD COM0_CTS# COM0_DTR# COM0_RI# COM1_DCD# COM1_DSR# COM1_RXD COM1_RTS# COM1_TXD COM1_CTS# COM1_DTR# COM1_RI# MIO-3260 User Manual...
  • Page 75 Table A.4: 64-Pin Connector B RS-232 RS-422 RS-485 Signal Name Signal Name Signal Name DATA- DATA+ COM0_DCD# DATA- COM0_DSR# COM0_RXD DATA+ COM0_RTS# COM0_TXD COM0_CTS# COM0_DTR# COM0_RI# MIO-3260 User Manual...
  • Page 76 WAFER BOX 2x4P 2.00mm 180D(M) DIP 24W2140-08S10 Pin Name +V12_DC_IN +V12_DC_IN + +V12_DC_IN +V12_DC_IN Inverter Power Output / Internal SATA Power Part Number 1655000025 Footprint WF_3x2P_79_BOX_D Description WAFER BOX 3x2P 2.0mm 180D(M) DIP 2005-2ws-6 Pin Name +V12_INVERTER LVDS0_ENABKL LVDS0_VBR +V5_INVERTER MIO-3260 User Manual...
  • Page 77 Pin Name VGA_HS VGA_VS GND_VGA +V5_VGA VGA_B VGA_R VGA_G VGA_DDAT VGA_DCLK CN10 USB 2.0 x 2 Part Number 1655002182 Footprint WF_5x2P_79_BOX_N10_D Description WAFER BOX 2x5P 2.0mm 180D(M) DIP 24W2140 Pin Name +V5_+V5SB +V5_+V5SB USB0_z_P- USB1_z_P- USB0_z_P+ USB1_z_P+ GND_IO MIO-3260 User Manual...
  • Page 78 GNDT1 LAN1_M3+ LAN1_M3- LAN1_M2+ LAN1_M2- LAN1_M1+ LAN1_M1- LAN1_M0+ LAN1_M0- CN11_1 Gigabit Ethernet with LED* Part Number 1655003483 Footprint WF_7x2P_79_BOX_D Description WAFER BOX 2x7P 2.00mm 180D(M) DIP 24W2140-14S10 Pin Name GNDT1 GNDT1 LAN1_M3+ LAN1_M3- LAN1_M2+ LAN1_M2- LAN1_M1+ LAN1_M1- MIO-3260 User Manual...
  • Page 79 *Supported by request CN14 SATA Part Number 1654011616-01 Footprint SATA_7P_WATF-07DBN6SB1U Description Serial ATA 7P 1.27mm 180D(M) SMD WATF-07DBLSB1UW Pin Name CN16 Mini PCIE/mSATA Part Number 1654002538 Footprint H285P5-MTH_MT_H177 Description MINI PCI E 52P 6.8mm 90D SMD AS0B226-S68Q-7H MIO-3260 User Manual...
  • Page 80 Pin Name WAKE# +V3.3_MINICARD +1.5V W_DISABLE# PLTRST# mSATA_mPCIE_RX- +V3.3_MINICARD mSATA_mPCIE_RX+ +1.5V SMB_CLK mSATA_mPCIE_TX- SMB_DAT mSATA_mPCIE_TX+ USB D- USB D+ +V3.3_MINICARD +V3.3_MINICARD MIO-3260 User Manual...
  • Page 81 +1.5V +V3.3_MINICARD CN29 MIOe Part Number 1654006235 Footprint MIOE_CPUSIDE Description B/B Conn. 40x2P 0.8mm 180D(F) SMD QSE-040-01-L-D Pin Name PCIE_RX0+ PCIE_TX0+ PCIE_RX0- PCIE_TX0- PCIE_RX1+ PCIE_TX1+ PCIE_RX1- PCIE_TX1- PCIE_RX2+ PCIE_TX2+ PCIE_RX2- PCIE_TX2- MIO-3260 User Manual...
  • Page 82 PCIE_RX3+ PCIE_TX3+ PCIE_RX3- PCIE_TX3- PCIE_CLK+ LOUTL PCIE_CLK- LOUTR AGND SMB_CLK SMB_DAT PCIE_WAKE# RESET# SLP_S3# CLK33M LPC_AD0 DDP_HPD LPC_AD1 LPC_AD2 DDP_AUX+ LPC_AD3 DDP_AUX- LPC_DRQ#0 LPC_SERIRQ DDP0_MIO_TX0+ LPC_FRAME# DDP0_MIO_TX0- USB0_D+ DDP0_MIO_TX1+ USB0_D- DDP0_MIO_TX1- USB1_D+/USB_SSTX+ MIO-3260 User Manual...
  • Page 83 DDP0_MIO_TX2+ USB1_D-/USB_SSTX- DDP0_MIO_TX2- USB2_D+/USB_SSRX+ DDP0_MIO_TX3+ USB2_D-/USB_SSRX- DDP0_MIO_TX3- USB_OC# +12VSB +12VSB +5VSB +5VSB +5VSB +5VSB MIO-3260 User Manual...
  • Page 84 CN31 18/24-bit LVDS Panel Part Number 1655000753 Footprint WF14P_49_BOX_RA_85204-14001 Description WAFER BOX 14x1P 1.25mm 90D(M) SMD 85204-14001 Pin Name LVDS0_CLK- LVDS0_CLK+ LVDS0_D3- LVDS0_D3+ LVDS0_D2- LVDS0_D2+ LVDS0_D1- LVDS0_D1+ LVDS0_D0- LVDS0_D0+ +5V or +3.3V +5V or +3.3V MIO-3260 User Manual...
  • Page 85 MIO-3260 User Manual...
  • Page 86 MIO-3260 User Manual...

  • Page 87: Wdt & Gpio

    Appendix WDT & GPIO...

  • Page 88: Watchdog Timer Sample Code

    + 65h; mov al,080h out dx,al ;==================================================== ;66H ;WDT timer time-out value ;bit[7:0]=0~255 ;==================================================== mov dx,SCH3114_IO + 66h mov al,01h out dx,al ;==================================================== ;bit[0] status bit R/W ;WD timeout occurred =1;WD timer counting = 0 MIO-3260 User Manual...

  • Page 89: Gpio Sample Code

    ; 1 = HIGH ; 0 = LOW ;==================================================== mov dx,SCH3114_IO + 23h ;GPIO 0 mov al,00h ;Set GPIO 0 as output type out dx,al mov dx,SCH3114_IO + 4Bh mov al,01h ;Set GPIO 0 as high value. out dx,al .exit MIO-3260 User Manual...
  • Page 90 MIO-3260 User Manual...

  • Page 91: System Assignments

    Appendix System Assignments...

  • Page 92: System I/O Ports

    Addr. Range (Hex) Device A0000h - BFFFFh IntelQ® HD Graphics A0000h - BFFFFh PCI Bus C0000h - DFFFFh PCI Bus E0000h - FFFFFh PCI Bus 90400000 - 905FFFFF Intel® Trusted Execution Engine Interface E0000000 - FEFFFFFF System resources MIO-3260 User Manual...

  • Page 93: Interrupt Assignments

    Communications Port (COM2) IRQ4 Communications Port (COM1) IRQ5 Available IRQ6 Available IRQ7 Available IRQ8 Internal RTC or HPET IRQ9 Microsoft ACPI-Compliant System IRQ10 Available IRQ11 SMBus Port IRQ12 Available IRQ13 Numeric data processor IRQ14 SATA controller IRQ15 SATA controller MIO-3260 User Manual...
  • Page 94 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2017...

Table of Contents