Advantech DLoG MTC 6 Series User Manual page 16

Basic safety guidelines
Lines must be laid in accordance with national regulations
When laying cables, please follow the appropriate national
installation regulations.
Use only original power supply cables from Advantech-DLoG
Advantech-DLoG power cables meet the specific requirements for
low-temperature flexibility, UV resistance, oil resistance, etc.
• Use only original power supply cables from Advantech-DLoG.
If other power supply cables are used:
• The user/operator of the industrial PC is solely responsible for the
• All warranties by DLoG GmbH are voided.
Ensure that the power cable is laid so that it is mechanically
protected.
Charging the vehicle battery: Disconnect the industrial PC from
the battery
While the vehicle battery is charging:
• The industrial PC must be disconnected from the vehicle battery.
• Or it must be ensured that the maximum permitted input voltage
6
resulting damage.
of the device is not exceeded.
User's Manual V2.00 MTC 6 Series