Common Mistakes In Usage; Power Supply; Powering Up/Down; Cable Cover - Advantech DLoG MTC 6 Series User Manual

Table of Contents

15. Common mistakes in usage

• Do not connect MTC 6 devices to an AC power supply.

• Observe correct voltage ranges.

• Please note that the function of the MTC 6's <Power>-key varies depending on how

the device is configured.

• Only disconnect the computer from the power supply after the computer has been

properly shut down and switched off. Otherwise file errors may occur on the

storage device (in operating systems that have no activated write protection filter).

• The supplied cable cover for the external ports must be installed prior to using the

MTC 6.

• In order to comply with protection class, please use the optionally available

assembly kit from DLoG.

MTC 6 Series

User's Manual V2.00

Common mistakes in usage

Table of Contents