tecan ls series Operating Manual page 99

Instrument Menu
Connect
Measurement Control Panel...
2004-11 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
In the Instrument menu, select Connect or on the toolbar click the Connect
button or press Shift + F5 .
This option allows the connection to an instrument. Before connecting the desired
instrument the communication port must be chosen. To do this select Setup
Port... from the Setup menu . For further information refer to the chapter Port
Setup on page 6-4 in this manual.
The desired instrument will be connected using the selected communication port.
A message in the window area of Scanner Shell software shows that the
connection is successful or unsuccessful:
Working in Scan Mode
Connection
Unsuccessful
Successful
Working in Demo Mode
Connection
Unsuccessful
Successful
In the Instrument menu, select Measurement Control Panel... and the
Measurement control dialog box appears.
In the Measurement control dialog box several groups, each containing
individual buttons, are shown that offer special operations for preparing and
scanning data. Measurement parameters and measurement options are defined.
The Start and Prescan buttons are not available in the Scanner Shell software.
For further information refer to the chapter 6.3 LSServer description in this
manual.
6. LSServer, Scanner Shell and Download
Message in window area of Scanner Shell
Scanner Server Version: V 2.20
No instrument connected!
Scanner Server Version: V 2.20
LS SERIES SCANNER (+LS) 12902000004
V 3.00 08/03 IMAGING
V1.00 08/01 MEAS IMAGE iV 1.10...................
Message in window area of Scanner Shell
Scanner Server Version: V 2.20
No instrument connected!
Scanner Server Version: V 2.20
LS SERIES SCANNER Simulation (+LSSim) 12345Sim
V 2.20 12 / 02 SIMULATION
V2.20 (RV1) iV 2.20...................
6-69