Lsserver; Starting The First Time; Measurement Control - tecan ls series Operating Manual

6. LSServer, Scanner Shell and Download
6.3

LSServer

6.3.1

Starting the First Time

6.3.2

Measurement Control

6-6 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
The LSServer is an instrument control and data scanning software specially
designed for connecting to Tecan instruments such as the Tecan LS SERIES
SCANNER. This chapter describes the parameters and operations; giving a
general understanding in preparing and scanning data and in getting the best
results for attached data analysis.
For details of data analysis see the corresponding Tecan LSA Software manual.
When starting LSServer for the first time, the Tecan LS Scanner Interface dialog
box is opened. After selecting instrument type and communication port and
confirming with OK the Measurement Control dialog box is displayed.
For all future starts of the LSServer:
In Tecan LSA Software, Acquire Menu select Tecan Scanner... and the
Measurement Control dialog box is displayed.
In the Measurement control dialog box, several groups, each containing
individual buttons, are shown that offer special operations for preparing and
scanning data. Measurement parameters and measurement options are defined
and finally measurements are started here.
The Measurement Control dialog box is divided into individual groups:
•
Measurement group
•
Instrument group
•
Measurement Parameter group
•
Settings group
•
Slides to Process group
2004-11