tecan ls series Operating Manual page 66

6. LSServer, Scanner Shell and Download
Barcode
6-36 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
Select the Barcode option button to define the barcode reading position.
The Geometry Parameters tab appears as follows:
The Barcode window contains the following elements:
Top Use the Top control or type in a value to set the barcode
spin control reading position (blue line).
The barcode position is centered on the slide and
must be at least 37.5 mm from the bottom line.
The barcode reading position can not be adjusted when
using a barcode bottom reader.
Barcode must be defined in the upper half of the slide
due to limited traveling distances in the y-direction.
If your instrument is equipped with a barcode bottom reader, the
barcode area is fixed. The barcode label has to be placed at the upper
end of the slide. The barcode must cover at least the area about 5mm
Note
Note
away from the upper end.
2004-11