Laser Control - tecan ls series Operating Manual

Laser Control

2004-11 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
In the Measurement Control dialog box, select Laser Control... and the Lamp /
Laser Control dialog box appears.
All lasers installed in your instrument are shown in the dialog box:
Click OK to save the changes and close the dialog box.
In the Laser Control dialog box specific lasers (1-4) can be activated /
deactivated and laser power can be set (Laser 4).
The Laser Control dialog box contains the following elements:
Laser 1 (633 nm)
check box
Laser 2 (532 nm)
check box
Laser 3
check box
Laser 4
check box
OK button
Cancel button
Help button
6. LSServer, Scanner Shell and Download
Select Laser 1 check box to activate the 633 nm laser.
Red LED is switched on at the rear of the instrument.
Select Laser 2 check box to activate the 532 nm laser.
Green LED is switched on at the rear of the instrument.
Select Laser 3 check box to activate the 594 nm laser and
the orange LED is switched on at the rear of the
instrument.
Select Laser 4 check box to activate the 488 nm laser and
the blue LED is switched on at the rear of the instrument.
(The blue laser can be power controlled).
Click OK to save the selected options and close the dialog
box.
Click the Cancel button to close the dialog box.
The selected options are not saved.
Click the Help button to display the online help for the dialog
box.
6-27