tecan ls series Operating Manual page 83

Save...
2004-11 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
In the Measurement Control dialog box, click Save... to save the current
measurement parameters under the selected filename. The standard Windows
file Save As dialog box appears. Click OK to save the new parameters as a
Measurement Parameter (.lsp) file and close the dialog box.
When a Measurement Parameter file is saved the currently defined measurement
parameters will be saved, which include all of the settings in the Measurement
Parameter dialog box on the General, Geometry Parameter, and Scan Settings
tabs.
The selection of the slides to be processed will not be saved.
If a measurement parameter file with the same name already exists it will be
overwritten.
The Save As dialog box:
The Save As dialog box is the standard Windows file Save As dialog box. It
contains the following elements:
Save in In the Save in combo box, select the drive and the folder in
combo box which the measurement parameter file should be saved.
Workspace The Workspace list box shows the files and folders selected in
list box the Save in combo box.
File Name edit Enter the File Name for your measurement parameter file or
box select one from the list.
Save as type All Tecan measurement parameter files are saved with the file
combo box extension *.lsp .
Save button Click the Save button to save the current measurement
parameters in a file with the extension *.lsp.
Cancel button Click the Cancel button to close the dialog box without saving.
6. LSServer, Scanner Shell and Download
Note
6-53