Lamp Control - tecan ls series Operating Manual

6. LSServer, Scanner Shell and Download
Log Ole Interface
Show Logfile

Lamp Control...

Help Menu
About
6-88 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
In the Instrument menu, select Connect to connect the instrument.
In the Advanced menu, select Log Ole Interface .
The Log Ole Interface option disables / enables the logging of LSServer data.
When the Log Ole Interface option is selected (√), the LSServer data log will be
activated.
When the Log Ole Interface option is cleared, the LSServer data log will be
deactivated.
In the Instrument menu, select Connect to connect the instrument.
In the Advanced menu, select Show Logfile .
The Show Logfile option starts the standard Windows editor (i.e. notepad) and
shows the LSServer log file.
When the Show Logfile option is selected (√), the LSServer.log file will be
opened .
When the Show Logfile option is cleared, the LSServer.log file will not be
opened .
In the Instrument menu, select Connect to connect the instrument.
In the Advanced menu, select Lamp Control...
The Lamp Control dialog box is used to select lasers and laser power.
For further information refer to the chapter Laser Control description in this
manual.
In the Lamp Control dialog box specific lasers (1-4) can be activated /
deactivated and laser power can be set (Laser 4).
In the Help menu, select About... .
Information about the Scanner Shell program, the version number and Copyright
are displayed in the About dialog box.
2004-11