tecan ls series Operating Manual page 86

6. LSServer, Scanner Shell and Download
Measure
Measure
grid box
6-56 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
Before starting a scan, the slides to be processed and name(s) of the image(s)
must be defined (all slides selected is the default setting). This is done in the
Measure grid box consisting of 3 columns and a variable number of rows:
•
The Slide grid column displays the slide position in alphanumerical order.
The first character represents the row, the second character the column
position in the defined slide adapter.
For example, using a slide adapter with slide positions arranged in 2 columns
and 2 rows the Slide grid column shows:
A1 = slide on position column 1 / row 1
B1 = slide on position column 1 / row 2
A2 = slide on position column 2 / row 1
B2 = side on position column 2 / row 2
•
The Process grid column displays check boxes for each slide defined. All
slides selected are processed during next measurement.
Select the check boxes of the corresponding slides to be processed.
Select several rows and press Insert Key / Delete Key to mark the selected
slides to be processed / not to be processed .
Click the heading of the Process column to select all of the rows in this column.
Press Insert Key / Delete Key to mark all of the slides to be processed / not
to be processed .
•
In the Filename grid column the image name must be entered. The
following limits should be noted:
▪
Maximum name length: 50 characters
▪
Input data allowed:
Alphanumerical data A -Z, a-z, digits 0-9 and underline.
The Filename grid column is disabled if Use standard name check box is
selected. The name entered in standard name edit box is used creating image
filename.
The Filename grid column is enabled if Use standard name check box is
cleared. The name entered in Filename grid column is used creating the image
filename.
2004-11