tecan ls series Operating Manual page 82

6. LSServer, Scanner Shell and Download
Load...
6-52 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
In the Measurement Control dialog box, click Load... to open existing
Measurement Parameter (.lsp) files. The standard Windows Open dialog box
appears.
In the Open dialog box all existing Measurement Parameter files will be shown.
After selecting the requested file it will appear in the filename line. Click OK to
load the new measurement parameters and close the dialog box.
When a Measurement Parameter file is opened the defined measurement
parameters of the file will be loaded, which include all of the settings in the
Measurement Parameter dialog box on the General, Geometry Parameter, and
Scan Settings tabs.
The selection of the slides to be processed will use the default settings
in which all slides are selected (see Slide Settings).
The Open dialog box:
The Open dialog box is the standard Windows file open dialog box. It contains
the following elements:
Look in In the Look in combo box, the folder from which the
combo box measurement parameter file can be opened, is selected.
The Workspace list box shows the files and folders selected in
Workspace
list box the Look in combo box.
File name edit In the File name edit box the measurement parameter file can
box be selected. Either type the name of the file or use the Look in
selection to obtain a list of file names from which the
measurement parameter file can be selected.
Files of type All Tecan measurement parameter files have the file extension
combo box *.lsp .
Open as read Select Open as read only to view the file and protect it from
only check being changed.
box
Open Click the Open button to load a selected measurement
button parameter file (*.lsp).
Cancel button Click the Cancel button to close the dialog box without loading
a file.
Note
2004-11