tecan ls series Operating Manual page 117

Figure 6-11 Skirt
heights
2004-11 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
Skirt height In the Skirt height group box the skirt dimensions of the slide
adapter must be entered.
Carrier controls
Clamp controls
Shuttle controls
Click the Load Standard Adapter button to set all adapter
data to default values (equivalent to the Standard Tecan Slide
Adapter).
Preview In the Preview group box the adapter format which
group box corresponds to the entered parameters is displayed.
The Preview window displays the adapter format according to
the data entered: A frame is generated with single sub-areas
called scan areas. The parameters of a single scan area are
represented in the Geometry Parameter Tab of the
Measurement parameter dialog box of LSServer interface.
Close Click the Close button to save the entered slide data and
close dialog box.
Load Click Load to open the standard Windows Open dialog box.
Slide Adapter Format (.saf) files already available are shown
in the file area. To select a file to be loaded, click on the item
or enter its name into the File name edit box. Click OK to load
the SAF file.
One Adapter Format file, corresponding to the Standard Tecan
Slide Adapter, is already installed: standard.saf .
All special adapter format files are loaded from / saved in:
•
•
Click the Save button to open the standard Windows Save
Save
dialog box. After entering the file name and clicking OK all
adapter data is saved.
Help Click the Help button to display the online help for the dialog
box.
6. LSServer, Scanner Shell and Download
Enter the carrier skirt height
( A in Figure 6-11 Skirt heights).
Enter the clamp skirt height
( B in Figure 6-11 Skirt heights).
Enter the shuttle skirt height
( C in Figure 6-11 Skirt heights).
the default directory created after the installation of the
LSServer software: C:\Program Files\Common
Files\Tecan\Reader\SAF
or in a user defined directory
6-87