Insert Slide(S) Into Slide Adapter - tecan ls series Operating Manual

5. Operation
5.2

Insert Slide(s) into Slide Adapter

5-4 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
Insert slide(s) into slide adapter as shown below:
Figure 5.5 a
Ensure that the slide is placed tightly on its support And in the right
orientation in the adapter. If it is not placed correctly in the adapter the
autofocus algorithm might fail to find a focal plane.
Place slide adapter on the plate transport in the same orientation as shown below
(Fig. 5.5 b): - moveable spring should be located in the front
Figure 5.5 b
The adapter is semi-disposable. The clamps that secure the slide might
wear and the slides might become too loose in the adapter. Please call
your Tecan sales representative to order new adapters.
Caution
Note
2004-11