tecan ls series Operating Manual page 120

6. LSServer, Scanner Shell and Download
Port Setup - Twister
6-90 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
In the Instrument menu, select Connect to connect the instrument. In the Service
menu, select Stacker Setup... and then click Port Setup . The Port Setup dialog
box appears in which the stacker instrument and communication port can be
selected:
In the Port Setup dialog box select Twister from the Stacker combo box.
Select the communication port which is used to connect the Twister from the
COM Port combo box. Normally the Twister is connected using COM 2, because
COM 1 is reserved for other instruments such as the Tecan LS SERIES
SCANNER .
Clicking OK saves all entered data and closes the Port Setup dialog box.
The Port Setup dialog box contains the following elements:
Stacker In the Stacker combo box the Twister must be chosen as the
combo box connected stacker instrument.
COM Port In the COM Port combo box the COM Port, into which the Twister
combo box is connected, must be selected:
When using the Tecan LS SERIES SCANNER instrument, the
LS Scanner instrument is normally connected to COM 1 and the
Twister is connected to COM 2.
OK button Click OK to save the selected options and close the dialog box.
Cancel button Click Cancel to close the dialog box. The selected options are not
saved.
2004-11