tecan ls series Operating Manual page 44

6. LSServer, Scanner Shell and Download
Image Prescan Dialog Box
Area Selection group box
Scan Area option button
6-14 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
When the image prescan of the first selected area is complete, the Image
Prescan dialog box appears with the Area Selection group box and the image
appears with an AOI (Area of Interest). The user is asked to set the Scan Area,
the Autofocus Area and the AGC Scan Area. In Tecan LS with integrated barcode
reader, it is also possible to set the Barcode Area. Click Apply to confirm the
newly defined areas. Click OK to save the settings and close the dialog box.
The Image Prescan dialog box contains the following elements:
Select the Scan Area option button to adjust the boundaries of the rectangular
AOI. To adjust a boundary, place the cursor along the edge or corner of the AOI
and drag it when the 2-way cursor appears. To move the AOI, place the cursor in
the middle of the rectangle and drag it when the 4-way cursor appears. Confirm
the AOI position by clicking the Apply button.
figure 6-1
Minimum scan area: 1mm x1mm.
AOI
2004-11