Muratec F-315 Field Engineering Manual page 202

Facsimile system
Hide thumbs Also See for F-315:
Table of Contents

Advertisement

What you see on the LCD
No Drum Unit
No Number Stored
No Passcode
No PIN Number
No Report
No Toner Cartridge
Not Allowed in Macro
Open 1st Side Cover
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open&Close ScanCover
Reset Document
Open Front Cover
Follow Instruction A
Paper Mismatch
Set XXX paper
Press Stop
Please Call Service
XXX
Please Supply Paper
Please Replace Drum
Please Replace Toner
Please Wait
Printer In Use
What it means/What to do
The drum cartridge is missing or has not been properly installed in your
fax machine.
Please properly install the drum cartridge.
You selected an autodialer, batch box or F-Code box number for which
there is no fax (or phone) number programmed.
Either choose another number or dial a phone number directly from the
numeric keypad.
You tried to program a security feature, but there's no protection
passcode stored in your fax machine.
Store a protection passcode in your machine, then retry again.
You selected "Mode1" in the pin mask feature and tried to call an
autodialer number in which no PIN has been entered, or to call using
numeric keypad without PIN.
Enter a PIN, then try again.
You requested an activity journal or confirmation report, but your fax
machine has no record of any fax jobs having occurred.
The toner cartridge is missing or has not been properly installed in your
fax machine. Please properly install the toner cartridge.
During macro registration, you pressed the key which cannot be
registered in Macro, such as <Monitor>.
The paper is jammed in your fax machine.
Open the cover indicated on the LCD, and remove the jammed paper
carefully.
Either your document wasn't inserted correctly, or the fax to which you're
sending can't handle the document's page length.
Reset the page and try again.
The charge wire of drum cartridge is dirty. Clean the charge wire.
Your machine can print about 100 sheets after this message appears, but
afterwards the machine displays "Printer Not Usable" message and
cannot print any page until the charge wire is cleaned.
In PC printing, the size of paper in the paper cassette is not match up the
paper size you specified by printer driver. Press <Stop> to cancel a print
job.
Then set the correct size of paper and try printing again.
The printer unit of your fax machine has become inoperable.
See page 4-22.
The paper cassette or bypass tray is out of paper.
Supply paper to the cassette and/or the bypass tray.
Your toner cartridge doesn't work. Your machine cannot print until it is
replaced with a new drum cartridge. Replace it
Your drum cartridge is empty. Replace the toner cartridge. The machine
cannot print until it is replaced with a new toner cartridge.
Your fax machine's printer is either warming up or busy.
Please wait until the fax is finished printing and then re-try your command
or operation.
The command you're trying to enter requires the use of the printer, which
is already in use.
Wait for the fax to finish printing, then try again.
4-17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfx-1950Mfx-1350F-305

Table of Contents