Setup The Officebridge - Muratec F-315 Field Engineering Manual

16. Attach the NETWORK label.
N E T
W O
R K
17. Reattach the covers and the harness.
18. Attach the "ADDRESS ENTRY" label to the position as shown on the illustration below. (The
"Address Entry" label is on the "Soft key label" supplied with the MFP.)
Address Entry

Setup the OfficeBridge

Refer to the "Setup Guide" on the CD to setup OfficeBridge
1. Insert the "Setup disk" CD into the CD-ROM drive of the computer.
2. Click [Manuals], and then [Setup Guide]. The Setup Guide will open.
6-17