Muratec F-315 Field Engineering Manual page 28

Sensor Input test ................................................................................................<Menu>, <*>, <2>, <2>
Sensor diagnostic test.
Printer diagnostic mode .....................................................................................<Menu>, <*>, <2>, <3>
Printer diagnostic test.
Network service mode .......................................................................................<Menu>, <*>, <2>, <4>
Used to display the server sumcheck or to initialize the network settings, when an optional
network board is installed.
Set second line ...................................................................................................<Menu>, <*>, <2>, <8>
Used to set memory switches, unique switches, ECM mode, pose length and numbers of rings
for the second telephone line.
Flash ROM Sum check........................................................................................<Menu>, <*>, <2>, <9>
Used to confirm flash ROM Check Sum after the software is overwritten.
Service Report setting ........................................................................................<Menu>, <*>, <4>, <2>
Used to enter location where to send the service report.
Printer registration adjustment ..........................................................................<Menu>, <*>, <4>, <3>
Used to adjust the printer registration.
Update the software ............................................................................................<Menu>, <*>, <9>, <8>
Used to upgrade the software using the USB RomWrite application.
Quick installation mode ......................................................................................<Menu>, <*>, <9>, <9>
You can set the initial setting mode, consumable order sheet setting and service report setting
continuously.
3-2