Muratec F-315 Field Engineering Manual page 260

6. Remove the two Bracket transfer tabs from the back of the Guide inner.
7. Remove the ROLLER TRANSFER.
Bracket transfer
ROLLER REGISTER
1. Open the Cover jam access.
2. Remove the Knob lock JAC. (See page 5-47)
3. Remove the Guide inner. (See page 5-47)
4. Remove two E-rings, and then remove the Gear 16H-0.8.
5. Hold the Bearing press's, and slide and remove the ROLLER REGISTER.
Bearing press
Bearing
Roller transfer
ANB03
4)
Roller register
Bearing press
ANA05
ANB03
4)
Gear 16H-0.8
5-48 5-48
Bracket transfer
Bearing press
Gear 16H-0.8