Clear Optional Data; Set Service Code - Muratec F-315 Field Engineering Manual

3.20 Clear Optional Data

This mode clears all data and all activity journals for Printer controller and second phone line.
1. Press <Menu>, <*>, <1>, <8>.
Option Data Initial
Yes → Enter
2. Press <Enter>. The optional data will be cleared.
Note: To finish the operation without performing initialization, press <Cancel>.

3.21 Set Service Code

This is the code to protect the life monitor clear operation. If it is not necessary to protect to the life monitor
clear operation, abort this operation without entering the service code.
1. Press <Menu>, <*>, <1>, <9>.
Set Service Code
Old Passcode
2. Your next mode depends on whether you're creating or modifying the service code:
• If creating ––– Use the numeric keypad to enter 0000 and press <Enter>.
• If modifying ––– Use the numeric keypad to enter the proper service code and press <Enter>. If
you enter an invalid code, the fax will reject the attempt and abort this operation.
3. Use the numeric keypad to enter the four-digit service code.
Set Service Code
New Passcode
4. Press <Enter>.
Note: To turn off the service code and return to normal life monitor clear (not protected), change the code
to 0000 by repeating steps 1-4 and entering 0000 in step 3.
:****
:1234
3-142