Set Service Report; Set The Service Report - Muratec F-315 Field Engineering Manual

3.28 Set Service Report

3.28.1 Set the service report

If using this feature, you should be enter following items:
• Report location 1 and 2 – Where to send the service report
• Report format – Select between simple report or detailed report
• Period – The report can be send ether once in a determined month or one a month on a designated date
and time.
1. Press <Menu>, <*>, <4>, <2>.
Set RDS
/ /Enter
2. Press <Enter>.
Send SvcReport
/ /Enter
3. Press < > or < > to select "On" or "Off" and activate/deactivate service report setting. Then press
<Enter>.
Note: When you have selected "Off", the machine will return to the display in step 1.
4. When you selected "On", the LCD will show:
Location1
/ /Enter
Two fax numbers can be set as Service report sending destination ("Location 1" and "Location 2"). Enter
the settings for "Location 1" described through Steps 4 to 6, and then enter settings for "Location 2".
5. Select "On", then press <Enter>.
Location1 Fax Number
US models have initially input fax number for "Location 1".
6. Enter the fax number and press <Enter>.
7. The LCD shows:
Report Format:Simple
/ /Enter
Press < > or < > to select the Report format from "Simple" or "Detail" and press <Enter>.
8. The LCD shows:
Period :Interval
/ /Enter
Press < > or < > to select the sending period from "Interval" or "Monthly" and press <Enter>.
To send the report at some definite interval, select "Interval".
To send the report on a designated time once a month, select "Monthly".
• When you select "Interval", proceed to step 9–1.
• When you select "Monthly", proceed to step 9–2.
9-1. You can set the interval for service report auto transmission from 1 to 12 months.
Enter Time
(01–12)
The default setting is 3 months. Enter the desired number (01 to 12) using the numeric keypad, and
press <Enter>.
:Off
:Off
03 months
3-148