Scan Related Settings; Transmitting Only Part Of The Document (Scan Size) - Muratec MFX-2550 User Manual

Scan Related Settings

Transmitting Only Part of the Document (Scan Size)

You can transmit an image scanned using a scan size set in advance. This is useful when
you want to transmit a part of the document or want to specify the document size.
Note
• When you scan using the document glass, only an area from the reference setting
position equal to the set scan size is scanned.
• When you scan using the ADF, only an area from the center with a width equal to
the set scan size is scanned. The whole length of the document is scanned.
Document glass
Reference setting position
Half-letter
Reference setting position
A5
1
Load the document, and press <Fax>.
2
Press [Advanced].
4-4

Scan Related Settings

ADF
Reference
setting
position
Letter Legal
Reference
setting
position
A4 F4
A...Legal / Letter / Half-letter
A...A4 / A5 / F4
A
A