Muratec F-315 Field Engineering Manual page 133

Unique Switch 74 – Operation
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 1 Prohibit double registration
0: No
1: Yes
2 1 Priority of consumable order
sheet printing
0: Print after the current
printing job completed
1: Print immediately
1 0 Print the transmission time on
TCR
0: Print the transmit time
1: Blank
0 1 When receive a fax message
during Auto power off mode,
the LCD will be in standby
mode
0: No
1: Yes
Unique Switch 75 ∼79 – Factory use only
Adjust
When set to "0", the same phone number can be
registered in two or more one–touch keys or speed
dial numbers.
When the drum cartridge has reached its design life,
or the toner cartridge is empty, the machine prints a
consumable order sheet (see unique switch 73).
When this switch is set at "0", the machine not print
consumable order sheet until the current printing job
is finished.
When set to "0", the transmission time will be
printed on TCR.
3-107
Usage/Comments