Updating The Software Using The Pc - Muratec F-315 Field Engineering Manual

3.31.3 Updating the software using the PC

Important: You cannot update the software in following situations:
· The machine is in transmission
· The machine is in scanning or in printing
· Data are stored in memory
In that case, wait until the transmission, scanning or printing ends, or the stored data is
transmitted, deleted or whatever and update the software.
1. Press <Menu>, <*>, <9>, <8>, <Enter>. (The displayed LCD may differ according to the software
version.)
1950 USA A0A0A0
1950 EUR A0A0A0
2. Connect your PC and the machine with USB cable. Click [Start] on the PC screen.
3. Launch the RomWrite application registered in the Startup menu.
3-156