Attaching The Handstrap - Symbol SPT 1700 Series Product Reference Manual

SPT 1700 Series Product Reference Guide

Attaching the Handstrap

The SPT 1700 has an optional handstrap which increases comfort when holding the terminal
for extended periods of time. To attach the handstrap to the back of the terminal:
1. Thread the metal piece through the metal handstrap connection on the back of the
terminal.
2. Slide the flat metal piece into the handstrap connection on the bottom of the
terminal.
3. Adjust the velcro
1-24
®
strap to fit your hand.
Thread metal piece
through this connector
Slide flat metal piece up
and into this connector