Configuring The Spectrum24 Network (Spt 1740 Only) - Symbol SPT 1700 Series Product Reference Manual

SPT 1700 Series Product Reference Guide
Setting the Current Date
The Set Date box in the General Preferences screen is used to set the current date for your
SPT 1700 terminal.
To set the current date:
1. Tap the Set Date box to open the Set Date dialog.
2. Tap the arrows at the top to select the current year.
3. Tap a month box to select the current month.
4. Tap the current date to close the Set Date dialog and return to the General
Preferences screen.
Note: You do not need to adjust the other General Preference settings at this
time. See General Preferences on page 12-9 for information about the
remaining options.

Configuring the Spectrum24 Network (SPT 1740 only)

Before the SPT 1740 can be used on the Spectrum24 wireless LAN, your facility must be set
up with the equipment required to run the wireless LAN and your terminal must be properly
configured. Refer to Chapter 2, Spectrum24 Setup for instructions on configuring your
terminal for use with Spectrum24.
1-18
Tap arrows to select year
Tap to select month
Tap to select date