Unpacking The Terminal - Symbol SPT 1700 Series Product Reference Manual

Getting Started with the SPT 1700
Introduction
This chapter explains the physical buttons and controls on your SPT 1700 terminal, how to
install and charge the battery, start your SPT 1700 Series terminal for the first time, set up
your cradle and install your Symbol Palm Terminal Desktop software.

Unpacking the Terminal

Carefully remove all protective material from around the terminal and save the shipping
container for later storage and shipping.
Verify that you received all equipment listed on the packing slip and inspect the equipment
for damage. If any equipment is missing or damaged, contact the Symbol Technologies
Support Center immediately. See page xvi for contact information.
1-3