Conducting A Local Hotsync Operation; Selecting Hotsync Setup Options - Symbol SPT 1700 Series Product Reference Manual

SPT 1700 Series Product Reference Guide
6. Enter a user name for your SPT 1700 terminal and click the OK button to open the
HotSync Progress dialog and start the synchronization process.
Important:
7. Wait for the Symbol Palm Terminal Desktop to display a message indicating that the
process is complete.

Conducting a Local HotSync Operation

After you complete the first HotSync operation, the HotSync process is even faster and easier!
To conduct a local HotSync operation:
1. Insert the SPT 1700 terminal in the cradle, or connect the synchronization/charging
cable.
2. If the HotSync Manager is not running, start it.
3. Press the
process. If you are using the synchronization/charging cable or the CRD 1700-4000S
cradle, tap the
4. Wait for the Symbol Palm Terminal Desktop to display a message indicating that the
process is complete.

Selecting HotSync Setup Options

You can choose when you want HotSync Manager to run, and adjust the local and modem
HotSync settings.
To set the HotSync Options:
1. Click the
9-6
Every SPT 1700 terminal should have a unique name. Never try to
synchronize more than one SPT 1700 terminal to the same user name.
button on the front of the CRD1700-1000S cradle to start the HotSync
icon on the terminal's application screen.
icon in the Windows System Tray to open the HotSync Manager menu.