Filing A Message - Symbol SPT 1700 Series Product Reference Manual

SPT 1700 Series Product Reference Guide
message. If you tap the Yes button, your SPT 1700 terminal saves a
draft of your message.
To save a message as a draft:
1. Create a message in the New Message screen.
2. Tap the
3. Tap Save Draft from the Message menu to move the message to the Draft folder.
To edit a message saved as a draft:
1. In the Message List screen, tap Draft from the pick list in the upper-right corner to
display a list of the messages in the Draft folder.
2. Tap the draft you want to display.
3. Tap the Edit button to move your draft to the New Message screen.
4. Enter your changes, then either save it again as a draft or tap the Send button to move
the message to your Outbox folder.

Filing a Message

Your SPT 1700 terminal can store any message you receive or create in the Filed folder. The
contents of this folder do not automatically synchronize with your desktop e-mail application
during a HotSync operation. However, your SPT 1700 terminal does store a back-up copy of
the Filed folder on your computer hard drive.
To file a message:
1. Open a message.
2. Tap the
10-16
icon to open the Mail menus.
icon to open the Mail menus.
Tap here to
select
message
Tap to edit
draft in New
Message
screen