Symbol SPT 1700 Series Product Reference Manual page 148

SPT 1700 Series Product Reference Guide
terminals for a group of users, see Creating a User Profile on page 9-14 before performing
the following steps.
Important: You must perform your first HotSync operation with a local, direct
connection, rather than using a modem.
To perform a HotSync operation for the first time:
1. Double-click the Symbol Palm Terminal Desktop icon on the Windows desktop (or
select Symbol Palm Terminal Desktop from the Start menu) to start the Symbol Palm
Terminal Desktop software.
2. Click the
Tip: The Windows System Tray is usually in the lower-right corner on your computer
display. The location may vary depending on the location of the taskbar and the
version of Windows you are using.
3. Click Local from the HotSync Manager menu to indicate that you are using the
cradle or the synchronization/charging cable to synchronize.
4. Turn on the SPT 1700 terminal and slide it into the cradle.
Note: If you are using the synchronization/charging cable, connect one end
of the cable into the serial port on the back of your computer, and the
other end into the serial port on the bottom of the terminal.
9-4
icon in the Windows System Tray to open the HotSync Manager menu.